免费咨询热线:0769-81155878
环氧地坪漆_自流平地坪漆价格_防静电地坪施工工艺-『索美地坪漆』

东莞索美地坪漆公司专注于环氧地坪漆工程,防静电地坪漆工程,地下车库地坪漆工程

如何防止叉车对环氧地坪漆造成损害

由于环氧地坪漆具有诸多优点,如无接缝、耐腐蚀、防尘防水、维护方便和强度高、耐磨损等,许多大型仓库厂房也都开始使用环氧地坪漆,但是一般大型仓库厂房都会有叉车来搬运货物,用于载货的叉车往往都比较重,经过环氧地坪漆地面时,对漆膜的摩擦损耗较大,导致环氧地坪漆破损,降低环氧地坪漆的使用寿命。那么如何防止叉车对地坪漆造成损害呢?光磊地坪漆厂家建议大家采取以下小措施。

Because epoxy floor paint has many advantages, such as seamless, corrosion-resistant, dust-proof and waterproof, easy maintenance, high strength and wear resistance, many large warehouse factories have also begun to use epoxy floor paint, but generally large warehouse factories will have forklift trucks to carry goods, forklift trucks used for loading goods are often heavy, the friction loss of paint film is larger when passing through the floor paint floor. As a result, the floor paint is damaged and the service life of epoxy floor paint is reduced. So how to prevent forklift from causing damage to floor paint? Guanglei floor paint manufacturers suggest that we take the following small measures. 1、可以在工业厂房地面铺设硬纸片,让叉车进入车间的时候,可以通过与硬纸片进行摩擦,而降低对地坪漆的伤害。

1。 Hard paper can be laid on the floor of industrial plant。 When forklift truck enters the workshop, the damage to floor paint can be reduced by rubbing with hard paper。

2、叉车保持匀速速度。我们知道一般运载货物的叉车都比较重,而此时如果速度时急时缓,那么对于地面的摩擦将会更大,这就意味着对地面的伤害更大了,所以建议叉车进行车间时应保持匀速速度前进。

2. Forklift truck keeps constant speed. We know that the general forklift trucks carrying goods are heavier, and at this time, if the speed is fast and slow, then the friction on the ground will be greater, which means that the damage to the ground is greater, so it is suggested that the forklift truck should keep a uniform speed in the workshop.

3、对于一些时常有大型叉车进行的工业厂房,建议铺设环氧砂浆地坪或者金刚砂耐磨地坪,主要是考虑耐磨。

3. For some industrial workshops with large forklift trucks, it is suggested to lay epoxy mortar floor or diamond wear-resistant floor, mainly considering wear-resistant.


相关文章

我也留言

*

*

◎欢迎参与讨论,请在这里发表您的看法、交流您的观点。

关注微信
秒速时时彩官网 秒速时时彩 欢乐生肖开奖记录 秒速时时彩官网 必发彩票网 重庆欢乐生肖走势图 秒速时时彩官网 秒速时时彩官网 重庆欢乐生肖注册 吉利彩票官网